Create a Site-to-Site connection in the Azure portal (VPN)

Azure VPN gateways provide cross-premises connectivity between customer premises and Azure. This tutorial shows you how to use the Azure portal to create a Site-to-Site VPN gateway connection from your on-premises network to the VNet. You can also create this configuration using Azure PowerShell or Azure CLI.

In this tutorial, you learn how to:

• Create a virtual network
• Create a VPN gateway
• Create a local network gateway
• Create a VPN connection
• Verify the connection
• Connect to a virtual machine

Prerequisites

• An Azure account with an active subscription. If you don't have one, create one for free.
• Make sure you have a compatible VPN device and someone who is able to configure it. For more information about compatible VPN devices and device configuration, see About VPN Devices.
• Verify that you have an externally facing public IPv4 address for your VPN device.
• If you are unfamiliar with the IP address ranges located in your on-premises network configuration, you need to coordinate with someone who can provide those details for you. When you create this configuration, you must specify the IP address range prefixes that Azure will route to your on-premises location. None of the subnets of your on-premises network can over lap with the virtual network subnets that you want to connect to.

Create a virtual network

Create a virtual network (VNet) using the following values:

• Resource group: TestRG1
• Name: VNet1
• Region: (US) East US
• IPv4 address space: 10.1.0.0/16
• Subnet name: FrontEnd
• Subnet address space: 10.1.0.0/24

 Note

When using a virtual network as part of a cross-premises architecture, be sure to coordinate with your on-premises network administrator to carve out an IP address range that you can use specifically for this virtual network. If a duplicate address range exists on both sides of the VPN connection, traffic will route in an unexpected way. Additionally, if you want to connect this virtual network to another virtual network, the address space cannot overlap with the other virtual network. Plan your network configuration accordingly.

1. Sign in to the Azure portal.

2. In Search resources, service, and docs (G+/), type virtual network.

   

3. Select Virtual Network from the Marketplace results.

   

4. On the Virtual Network page, select Create.

   

5. Once you select Create, the Create virtual network page opens.

6. On the Basics tab, configure Project details and Instance details VNet settings.

    When you fill in the fields, you see a green check mark when the characters you enter in the field are validated. Some values are autofilled, which you can replace with your own values:

   • Subscription: Verify that the subscription listed is the correct one. You can change subscriptions by using the drop-down.
   • Resource group: Select an existing resource group, or click Create new to create a new one. For more information about resource groups, see Azure Resource Manager overview.
   • Name: Enter the name for your virtual network.
   • Region: Select the location for your VNet. The location determines where the resources that you deploy to this VNet will live.

7. On the IP Addresses tab, configure the values. The values shown in the examples below are for demonstration purposes. Adjust these values according to the settings that you require.

   

   • IPv4 address space: By default, an address space is automatically created. You can click the address space to adjust it to reflect your own values. You can also add additional address spaces.
   • Subnet: If you use the default address space, a default subnet is created automatically. If you change the address space, you need to add a subnet. Select + Add subnet to open the Add subnet window. Configure the following settings and then select Add to add the values:
     • Subnet name: In this example, we named the subnet "FrontEnd".
     • Subnet address range: The address range for this subnet.

8. On the Security tab, at this time, leave the default values:

   • DDos protection: Basic
   • Firewall: Disabled

9. Select Review + create to validate the virtual network settings.

10. After the settings have been validated, select Create.

Create a VPN gateway

In this step, you create the virtual network gateway for your VNet. Creating a gateway can often take 45 minutes or more, depending on the selected gateway SKU.

About the gateway subnet

The virtual network gateway uses specific subnet called the gateway subnet. The gateway subnet is part of the virtual network IP address range that you specify when configuring your virtual network. It contains the IP addresses that the virtual network gateway resources and services use.

When you create the gateway subnet, you specify the number of IP addresses that the subnet contains. The number of IP addresses needed depends on the VPN gateway configuration that you want to create. Some configurations require more IP addresses than others. We recommend that you create a gateway subnet that uses a /27 or /28.

If you see an error that specifies that the address space overlaps with a subnet, or that the subnet is not contained within the address space for your virtual network, check your VNet address range. You may not have enough IP addresses available in the address range you created for your virtual network. For example, if your default subnet encompasses the entire address range, there are no IP addresses left to create additional subnets. You can either adjust your subnets within the existing address space to free up IP addresses, or specify an additional address range and create the gateway subnet there.

Create the gateway

Create a VPN gateway using the following values:

• Name: VNet1GW
• Region: East US
• Gateway type: VPN
• VPN type: Route-based
• SKU: VpnGw1
• Generation: Generation1
• Virtual network: VNet1
• Gateway subnet address range: 10.1.255.0/27
• Public IP address: Create new
• Public IP address name: VNet1GWpip
• Enable active-active mode: Disabled
• Configure BGP: Disabled

1. From the Azure portal, in Search resources, services, and docs (G+/) type virtual network gateway. Locate Virtual network gateway in the search results and select it.

   

2. On the Virtual network gateway page, select + Add. This opens the Create virtual network gateway page.

   

3. On the Basics tab, fill in the values for your virtual network gateway.

   

   

   • Subscription: Select the subscription you want to use from the dropdown.
   • Resource Group: This setting is autofilled when you select your virtual network on this page.

   Instance details

   • Name: Name your gateway. Naming your gateway not the same as naming a gateway subnet. It's the name of the gateway object you are creating.
   • Region: Select the region in which you want to create this resource. The region for the gateway must be the same as the virtual network.
   • Gateway type: Select VPN. VPN gateways use the virtual network gateway type VPN.
   • VPN type: Select the VPN type that is specified for your configuration. Most configurations require a Route-based VPN type.
   • SKU: Select the gateway SKU from the dropdown. The SKUs listed in the dropdown depend on the VPN type you select. For more information about gateway SKUs, see Gateway SKUs.
   • Generation: For information about VPN Gateway Generation, see Gateway SKUs.
   • Virtual network: From the dropdown, select the virtual network to which you want to add this gateway.
   • Gateway subnet address range: This field only appears if your VNet doesn't have a gateway subnet. If possible, make the range /27 or larger (/26,/25 etc.). We don't recommend creating a range any smaller than /28. If you already have a gateway subnet, you can view GatewaySubnet details by navigating to your virtual network. Click Subnets to view the range. If you want to change the range, you can delete and recreate the GatewaySubnet.

   Public IP address

   This setting specifies the public IP address object that gets associated to the VPN gateway. The public IP address is dynamically assigned to this object when the VPN gateway is created. The only time the Public IP address changes is when the gateway is deleted and re-created. It doesn't change across resizing, resetting, or other internal maintenance/upgrades of your VPN gateway.

   • Public IP address: Leave Create new selected.
   • Public IP address name: In the text box, type a name for your public IP address instance.
   • Assignment: VPN gateway supports only Dynamic.
   • Enable active-active mode: Only select Enable active-active mode if you are creating an active-active gateway configuration. Otherwise, leave this setting Disabled.
   • Leave Configure BGP as Disabled, unless your configuration specifically requires this setting. If you do require this setting, the default ASN is 65515, although this can be changed.

4. Select Review + create to run validation.

5. Once validation passes, select Create to deploy the VPN gateway.

A gateway can take up to 45 minutes to fully create and deploy. You can see the deployment status on the Overview page for your gateway. After the gateway is created, you can view the IP address that has been assigned to it by looking at the virtual network in the portal. The gateway appears as a connected device.

 Important

When working with gateway subnets, avoid associating a network security group (NSG) to the gateway subnet. Associating a network security group to this subnet may cause your Virtual Network gateway(VPN, Express Route gateway) to stop functioning as expected. For more information about network security groups, see What is a network security group?

View the public IP address

You can view the gateway public IP address on the Overview page for your gateway.

To see additional information about the public IP address object, click the name/IP address link next to Public IP address.

Create a local network gateway

The local network gateway is a specific object that represents your on-premises location (the site) for routing purposes. You give the site a name by which Azure can refer to it, then specify the IP address of the on-premises VPN device to which you will create a connection. You also specify the IP address prefixes that will be routed through the VPN gateway to the VPN device. The address prefixes you specify are the prefixes located on your on-premises network. If your on-premises network changes or you need to change the public IP address for the VPN device, you can easily update the values later.

Create a local network gateway using the following values:

• Name: Site1
• Resource Group: TestRG1
• Location: East US

1. From the Azure portal, in Search resources, services, and docs (G+/) type local network gateway. Locate local network gateway under Marketplace in the search results and select it. This opens the Create local network gateway page.

2. On the Create local network gateway page, specify the values for your local network gateway.

   

   • Name: Specify a name for your local network gateway object.
   • Endpoint: Select the endpoint type for the on-premises VPN device - IP address or FQDN (Fully Qualified Domain Name).
     • IP address: If you have a static public IP address allocated from your Internet service provider for your VPN device, select the IP address option and fill in the IP address as shown in the example. This is the public IP address of the VPN device that you want Azure VPN gateway to connect to. If you don't have the IP address right now, you can use the values shown in the example, but you'll need to go back and replace your placeholder IP address with the public IP address of your VPN device. Otherwise, Azure will not be able to connect.
     • FQDN: If you have a dynamic public IP address that could change after certain period of time, usually determined by your Internet service provider, you can use a constant DNS name with a Dynamic DNS service to point to your current public IP address of your VPN device. Your Azure VPN gateway will resolve the FQDN to determine the public IP address to connect to.
   • Address Space refers to the address ranges for the network that this local network represents. You can add multiple address space ranges. Make sure that the ranges you specify here do not overlap with ranges of other networks that you want to connect to. Azure will route the address range that you specify to the on-premises VPN device IP address. Use your own values here if you want to connect to your on-premises site, not the values shown in the example.
   • Configure BGP settings: Use only when configuring BGP. Otherwise, don't select this.
   • Subscription: Verify that the correct subscription is showing.
   • Resource Group: Select the resource group that you want to use. You can either create a new resource group, or select one that you have already created.
   • Location: The location is the same as Region in other settings. Select the location that this object will be created in. You may want to select the same location that your VNet resides in, but you are not required to do so.

    Note

   • Azure VPN supports only one IPv4 address for each FQDN. If the domain name resolves to multiple IP addresses, Azure VPN Gateway will use the first IP address returned by the DNS servers. To eliminate the uncertainty, we recommend that your FQDN always resolve to a single IPv4 address. IPv6 is not supported.
   • Azure VPN Gateway maintains a DNS cache refreshed every 5 minutes. The gateway tries to resolve the FQDNs for disconnected tunnels only. Resetting the gateway will also trigger FQDN resolution.

3. When you have finished specifying the values, select the Create button at the bottom of the page to create the local network gateway.

Configure your VPN device

Site-to-Site connections to an on-premises network require a VPN device. In this step, you configure your VPN device. When configuring your VPN device, you need the following values:

• A shared key. This is the same shared key that you specify when creating your Site-to-Site VPN connection. In our examples, we use a basic shared key. We recommend that you generate a more complex key to use.
• The Public IP address of your virtual network gateway. You can view the public IP address by using the Azure portal, PowerShell, or CLI. To find the Public IP address of your VPN gateway using the Azure portal, navigate to Virtual network gateways, then select the name of your gateway.

To download VPN device configuration scripts:

Depending on the VPN device that you have, you may be able to download a VPN device configuration script. For more information, see Download VPN device configuration scripts.

See the following links for additional configuration information:

• For information about compatible VPN devices, see VPN Devices.

• Before configuring your VPN device, check for any Known device compatibility issues for the VPN device that you want to use.

• For links to device configuration settings, see Validated VPN Devices. The device configuration links are provided on a best-effort basis. It's always best to check with your device manufacturer for the latest configuration information. The list shows the versions we have tested. If your OS is not on that list, it is still possible that the version is compatible. Check with your device manufacturer to verify that OS version for your VPN device is compatible.

• For an overview of VPN device configuration, see Overview of 3rd party VPN device configurations.

• For information about editing device configuration samples, see Editing samples.

• For cryptographic requirements, see About cryptographic requirements and Azure VPN gateways.

• For information about IPsec/IKE parameters, see About VPN devices and IPsec/IKE parameters for Site-to-Site VPN gateway connections. This link shows information about IKE version, Diffie-Hellman Group, Authentication method, encryption and hashing algorithms, SA lifetime, PFS, and DPD, in addition to other parameter information that you need to complete your configuration.

• For IPsec/IKE policy configuration steps, see Configure IPsec/IKE policy for S2S VPN or VNet-to-VNet connections.

• To connect multiple policy-based VPN devices, see Connect Azure VPN gateways to multiple on-premises policy-based VPN devices using PowerShell.

Create a VPN connection

Create the Site-to-Site VPN connection between your virtual network gateway and your on-premises VPN device.

Create a connection using the following values:

• Local network gateway name: Site1
• Connection name: VNet1toSite1
• Shared key: For this example, we use abc123. But, you can use whatever is compatible with your VPN hardware. The important thing is that the values match on both sides of the connection.

1. Open the page for your virtual network gateway. You can navigate to the gateway by going to Name of your VNet -> Overview -> Connected devices -> Name of your gateway, although there are multiple other ways to navigate as well.

2. On the page for the gateway, select Connections. At the top of the Connections page, select +Add to open the Add connection page.

   

3. On the Add connection page, configure the values for your connection.

   • Name: Name your connection.
   • Connection type: Select Site-to-site (IPSec).
   • Virtual network gateway: The value is fixed because you are connecting from this gateway.
   • Local network gateway: Select Choose a local network gateway and select the local network gateway that you want to use.
   • Shared Key: the value here must match the value that you are using for your local on-premises VPN device. The example uses 'abc123', but you can (and should) use something more complex. The important thing is that the value you specify here must be the same value that you specify when configuring your VPN device.
   • Leave Use Azure Private IP Address unchecked.
   • Leave Enable BGP unchecked.
   • Select IKEv2.
   • The remaining values for Subscription, Resource Group, and Location are fixed.

4. Select OK to create your connection. You'll see Creating Connection flash on the screen.

5. You can view the connection in the Connections page of the virtual network gateway. The Status will go from Unknown to Connecting, and then to Succeeded.

Verify the VPN connection

In the Azure portal, you can view the connection status of a Resource Manager VPN Gateway by navigating to the connection. The following steps show one way to navigate to your connection and verify.

1. In the Azure portal menu, select All resources or search for and select All resources from any page.

2. Select to your virtual network gateway.

3. On the blade for your virtual network gateway, click Connections. You can see the status of each connection.

4. Click the name of the connection that you want to verify to open Essentials. In Essentials, you can view more information about your connection. The Status is 'Succeeded' and 'Connected' when you have made a successful connection.

   

Connect to a virtual machine

You can connect to a VM that is deployed to your VNet by creating a Remote Desktop Connection to your VM. The best way to initially verify that you can connect to your VM is to connect by using its private IP address, rather than computer name. That way, you are testing to see if you can connect, not whether name resolution is configured properly.

1. Locate the private IP address. You can find the private IP address of a VM by either looking at the properties for the VM in the Azure portal, or by using PowerShell.

   • Azure portal - Locate your virtual machine in the Azure portal. View the properties for the VM. The private IP address is listed.

   • PowerShell - Use the example to view a list of VMs and private IP addresses from your resource groups. You don't need to modify this example before using it.

     Azure PowerShellCopy

      

     Try It

     $VMs = Get-AzVM
     $Nics = Get-AzNetworkInterface | Where VirtualMachine -ne $null
     
     foreach($Nic in $Nics)
     {
     $VM = $VMs | Where-Object -Property Id -eq $Nic.VirtualMachine.Id
     $Prv = $Nic.IpConfigurations | Select-Object -ExpandProperty PrivateIpAddress
     $Alloc = $Nic.IpConfigurations | Select-Object -ExpandProperty PrivateIpAllocationMethod
     Write-Output "$($VM.Name): $Prv,$Alloc"
     }
     

2. Verify that you are connected to your VNet using the Point-to-Site VPN connection.

3. Open Remote Desktop Connection by typing "RDP" or "Remote Desktop Connection" in the search box on the taskbar, then select Remote Desktop Connection. You can also open Remote Desktop Connection using the 'mstsc' command in PowerShell.

4. In Remote Desktop Connection, enter the private IP address of the VM. You can click "Show Options" to adjust additional settings, then connect.

Troubleshoot a connection

If you are having trouble connecting to a virtual machine over your VPN connection, check the following:

• Verify that your VPN connection is successful.

• Verify that you are connecting to the private IP address for the VM.

• If you can connect to the VM using the private IP address, but not the computer name, verify that you have configured DNS properly. For more information about how name resolution works for VMs, see Name Resolution for VMs.

• For more information about RDP connections, see Troubleshoot Remote Desktop connections to a VM.

Optional steps

Add additional connections to the gateway

You can add additional connections, provided that none of the address spaces overlap between connections.

1. To add an additional connection, navigate to the VPN gateway, then select Connections to open the Connections page.
2. Select +Add to add your connection. Adjust the connection type to reflect either VNet-to-VNet (if connecting to another VNet gateway), or Site-to-site.
3. If you are connecting using Site-to-site and you have not already created a local network gateway for the site you want to connect to, you can create a new one.
4. Specify the shared key that you want to use, then select OK to create the connection.

Resize a gateway SKU

There are specific rules regarding resizing vs. changing a gateway SKU. In this section, we will resize the SKU. For more information, see Gateway settings - resizing and changing SKUs.

1. Go to the Configuration page for your virtual network gateway.

2. Select the arrows for the dropdown.

   

3. Select the SKU from the dropdown.

   

Reset a gateway

Resetting an Azure VPN gateway is helpful if you lose cross-premises VPN connectivity on one or more Site-to-Site VPN tunnels. In this situation, your on-premises VPN devices are all working correctly, but are not able to establish IPsec tunnels with the Azure VPN gateways.

1. In the portal, navigate to the virtual network gateway that you want to reset.

2. On the page for the virtual network gateway, select Reset.

   

3. On the Reset page, click Reset. Once the command is issued, the current active instance of the Azure VPN gateway is rebooted immediately. Resetting the gateway will cause a gap in VPN connectivity, and may limit future root cause analysis of the issue.

   

Additional configuration considerations

S2S configurations can be customized in a variety of ways. For more information, see the following articles:

• For information about BGP, see the BGP Overview and How to configure BGP.
• For information about forced tunneling, see About forced tunneling.
• For information about Highly Available Active-Active connections, see Highly Available cross-premises and VNet-to-VNet connectivity.
• For information about how to limit network traffic to resources in a virtual network, see Network Security.
• For information about how Azure routes traffic between Azure, on-premises, and Internet resources, see Virtual network traffic routing.

Clean up resources

If you're not going to continue to use this application or go to the next tutorial, delete these resources using the following steps:

1. Enter the name of your resource group in the Search box at the top of the portal and select it from the search results.

2. Select Delete resource group.

3. Enter your resource group for TYPE THE RESOURCE GROUP NAME and select Delete.